TUD-3 Banner

Combined Hardness Tester NOVOTEST T-UD3

Combined Hardness Tester NOVOTEST T-UD3

Price: On Request

Contact: ssgavankar@onestopndt.com/ support@onestopndt.com

Combined Hardness Tester NOVOTEST T-UD3
The device operates both UCI (Ultrasonic Contact Impedance) and the Leeb (dynamic) probes. Getting benefit from two types of measurements is the ultimate advantage that a portable device can provide

Advantages:

  • Small indenter imprint (suits for mirror surfaces of shafts necks, blades, gear teeth, etc.)
  • Measuring surface hardened layers hardness
  • Wide range of hardness testing
  • Various measurement modes
  • 88 combinations of materials and hardness scales (calibrations)
  • Calibration of any scale in any range
  • Convenience and ease of measurement
  • Optimized number of buttons
  • Large full-color graphic display with bright backlight
  • Built-in photo camera for thorough reports
  • Automatic probe types recognition
  • Connected probe types indication
  • The calibrations are stored in UCI probe memory
  • Extended operating temperature range (frost, down to – 40°C)
  • Internal memory and communication with a PC
  • New intuitive menu with tips on the buttons
  • Optional wireless mini printer
  • Waterproofed housing
  • Rubber bumper protected housing
  • Internal clock
  • Hardness value measuring for any mass products with more than 1 mm  thickness (small parts, thin-walled
  • structures, pipes, tanks, steel sheets, articles of complex shape, hardness testing of metal coatings, etc.)
  • Different operating modes:
  • Graph – the graph building mode
  • Histogram – the histogram building mode
  • Statistics – provides statistics for the current set of measurements
  • Smart – filters the incorrect measurements
  • Signal – displays the probe signal (only for the Leeb probe)

Specifications:

UCI probe types 1kgf (10N) 2.2 lbf, 5kgf (50N) 11lbf, 10kgf (98N) 22lbf
Leeb probe types D, DC, DL, C, D+15, E, G
Measuring range HV:230~940; HRC:20~70; HB:90~650. Tensile strength, MPa 370~1740
Measuring accuracy HV:±3%HV; HRC:±1.5%HRC; HB:±3%HB
Standards ASTM A1038, ASTM A956, ASTM E140
Indenter Diamond indenter (UCI), Hardened ball (Leeb)
Measuring direction Any direction 360°
Data storage Limited only by the memory card up to 32Gb
Communication Upload data to PC and export as a spreadsheet (USB cable and software included )
Hardness scale
  • UCI probe – HRC, HB, HV
  • Leeb probe – HRC, HB, HV, HRB, MPa
  • Additional custom scales for calibration.
Materials
  • Ultrasonic (UCI) probe – pre-calibrated for steel.
  • Dynamic (Leeb) pre-calibrated for steel, alloy steel, cast iron, stainless steel, aluminum, bronze, brass, copper.
  • Additional custom materials for calibration.
Data display Load applied/contact (UCI), Angle (Leeb), Single test result, Max, Min, Average of tests, Number of tests, Deviation, Var. coeff, Histogram, Signal and Smart Mode (Filter of incorrect measurements).
Indication Color LCD display (320×240)
Operating environment Temperature:-20°C~40°C; Humidity: 30%~80%R.H.
Power supply DC 4,5V (3 pcs batteries AA)
Instrument dimensions 160x75x30mm
Net weight Approx. 0.3kg (without probe)
Battery life Approx. 10 hours.

Seller Information

Back to Top
Logo Header Menu
Loading...