TreFoc Technology. A new laser focussing technology, uniquely available in DÜRR NDT Systems.

THREE SCANNERS IN ONE

What does TreFoc Technology mean and how does it work?
TreFoc Technology is the name for the our new laser focussing technology, uniquely in systems from DÜRR NDT. With TreFoc the laser beam is adjusted perfectly to give optimal image results and the highest signal-to-noise ratio in any application.

50 µm Corrosion measurements, overview radiographs, isotope applications

Inside the laser tube, an iris diaphragm adjusts the laser beam diameter. Since the perfect laser beam diameter can be selected for each object and image type, optimum results for any particular application can be easily achieved.

25 µm Weld inspection, metal casting, isotope applications

Regardless of the application – high-resolution image or low-exposure corrosion measurement – the unique TreFoc Technology give perfect image results with the best SNR every time. The principle of changing the laser beam diameter takes into consideration the maximum resolution of the Imaging Plates available on the market.

12.5 µm Weld inspection, aerospace, composite materials

So every Imaging Plate type can be read with a laser beam focussed specifically for that plate, thus always achieving the best image with the lowest noise.

Digital radiography has never been more intelligent!

Source: https://www.duerr-ndt.com/products/computed-radiography/hd-cr-35-ndt.html

Leave a Comment