Turnkey NDT for Foreign Object Detection Using Advanced Thermography
Only requires access to one side of panel
No contact with panel necessary
Detects FOD up to three plies deep
Uses innovative active Thermography technology
Measurement area 13″ x 17″
Measurement time 4-6 seconds
Scalable to cover larger areas
Detects a variety of FOD, such as release film, Teflon and other tape fragments. Insects, Razor Blades and other metal particles, pieces of gloves as well as air voids and wrinkles.
Scalable FOD Measurement System
FODView is a scalable and modular measurement system. The base system consists of a heat source (1.7kW Halogen Lamp), a smart thermal camera and a tablet PC with measurement software. This setup provides an inspection area of 13″ x 17″ during a single measurement. A typical measurement takes about 4-6 seconds until the result image is being displayed. Larger inspection areas can be achieved by adding additional halogen heat sources to the system and/or adding multiple cameras. The measurement head is small and compact and can easily be mounted on a mechanically articulated arm or robot for automated measurements.
Easy and Reliable Setup
Measurements are very easy to perform. A single button click starts the measurement. A contrast slider on the touchscreen interface allows the operator to enhance the inspection results, if needed. Measurement parameters can be saved and recalled with a touch of a button. Settings are password protected to avoid unauthorized manipulation of the setup.