Spectronics Corporation

Innovating for Today, Imagining for Tomorrow

0 / 5
Add to favorites

Spectronics Corporation’s mission is to achieve customer satisfaction through excellence in design and manufacturing. By fostering a corporate culture that attracts and retains creative, talented and energetic employees, we maximize our ability to provide innovative and cutting-edge technologies to our global customer base.

Spectroline® UV lamps and radiometers are widely used to verify the structural integrity of military and commercial aircraft. Spectroline® fluorescent dyes are used to check for fluid leaks in power plants, nuclear reactors, oil pipelines and industrial facilities worldwide, and were even used on the U.S. Space Shuttle.

A Nobel Prize-winning scientist used Spectroline® UV crosslinkers and transilluminators to do groundbreaking electrophoresis research that will benefit mankind as part of the Human Genome Project.
More than six decades since its inception, the goal of Spectronics is still the same — to produce effective, top-quality products that are on the cutting edge of today’s technology with the utmost dedication to customer satisfaction.

  • Address Spectronics Corporation
    956 Brush Hollow Road,
    Westbury, NY 11590
uVision™ 365 Economy NDT Lamp Standard Series

uVision™ 365 Economy NDT Lamp
Standard Series

UV-365ES: Standard intensity, (3) UV-A LEDs, (1) white light LED with FP-600 borofloat filter protector, heavy-duty 8 foot AC cord, UVS-30 spectacles and soft carrying case

UV-365EH: High intensity, (3) UV-A LEDs, (1) white light LED with FP-600 borofloat filter protector, heavy-duty 8 foot AC cord, UVS-30 spectacles and soft carrying case

UV-365MEH: High Intensity, (3) UV-A LEDs, (1) White Light LED with FP-600 Borofloat Filter Protector, BP-30 NiMH battery pack, Heavy-Duty 8 Foot AC Cord, UVS-30 Spectacles & Soft Carrying Case

Meet ISO 3059 Standards

Also available in 20-foot cord models and foreign voltages

These compact, cost-effective inspection lamps can be used in nondestructive evaluation, forensics, and security inspections.

In addition to three powerful UV-A LEDs, the uVision comes with a convenient White LED for illuminating work areas.

Description

  • IP 65 rating
  • 6 = Protected from total dust ingress
  • 5 = Protected from low-pressure water jets from any direction

Our most rugged and cost-effective lamp, its key features include:

  • IP 65 RATED
  • FANLESS
  • COOL RUNNING
  • LIGHTWEIGHT
  • RUGGED

For use in any Nondestructive Evaluation or Specialty Application that requires UV-A light.

uVision™ 365 DELUXE Series NDT LED Lamp Deluxe Series

uVision™ 365 DELUXE Series NDT LED Lamp Deluxe Series

ASTM E3022 & Rolls-Royce RRES 90061 Compliant Versions:

  • UV-365SBLC: Standard Intensity, (3) UV-A LEDs, (1) White Light LED w/ 128196 Faceplate w/ Black Light Filters, FP-600 Borofloat Filter Protector, 8′ AC Cord, UVS-30 Spectacles & Protective Case
  • UV-365MSBLC: Standard Intensity, (3) UV-A LEDs, (1) White Light LED w/ 128196 Faceplate w/ UVA Pass Filters, BP-30 NiMH battery pack, 126834 AC charger, FP-600 Borofloat Filter Protector, 8’ AC Cord, UVS-30 Spectacles & Protective Case
  • UV-365SBLCR: Standard Intensity, (3) UV-A LEDs, (1) White Light LED w/ 128196 Faceplate w/ UV-A Pass Filters, FP-600 Borofloat Filter Protector, Reel with 50′ cord, 8′ AC Cord, UVS-30 Spectacles

ASTM E3022 Compliant Versions:

  • UV-365HC: High Intensity, (3) UV-A LEDs, (1) White Light LED w/ 128196 Faceplate w/ UVA Pass Filters, FP-600 Borofloat Filter Protector, 8′ AC Cord, UVS-30 Spectacles & Protective Case
  • UV-365MHC: High Intensity, (3) UV-A LEDs, (1) White Light LED w/ 128196 Faceplate w/ UVA Pass Filters, BP-30 NiMH battery pack, 126834 AC charger, FP-600 Borofloat Filter Protector, 8’ AC Cord, UVS-30 Spectacles & Protective Case
  • UV-365HCR: High Intensity, (3) UV-A LEDs, (1) White Light LED w/ 128196 Faceplate w/ Black Light Filters, FP-600 Borofloat Filter Protector, Reel with 50’ Cord, 8′ AC Cord, UVS-30 Spectacles

All lamps meet ISO 3059 Standard

Also available in 20-foot cord models and foreign voltages

Key Features:

  • IP 65 RATED – Dust Tight/Protected Against Jets of Water so your lamp is protected in harsh environments
  • FANLESS & COOL RUNNING – No fan means fewer repairs and no dust clogs, and the lamp stays cool to the touch, cutting down on fire and burn hazards
  • LIGHTWEIGHT & RUGGED – Lightweight enough for using all day, and rugged enough for your work environment
  • WHITE LIGHT INTENSITY ADJUSTMENT – Easier on the eyes of NDT Inspectors
  • EXTREMELY LOW VIOLET HUE/VISIBLE LIGHT EMISSION – Brilliant fluorescent responses
  • Fully Serialized Certificates of Conformance and Validation Reports Provided
QDR-365SA - QUADRAN™ 365 S-Series

Versatile Multi-LED, Broad-Beam NDT Inspection Lamp

The QDR-SA QUADRAN™ 365 S-Series lamp features four UV-A LEDs plus a convenient white light LED to quickly switch between fluorescent inspection and flaw location. For increased flexibility, a unique dual, high/low white light output control. Can be used for Handheld and/or In-Line inspections.

Description

  • Built-in fan keeps LEDs cool to maintain optimum light output during extended use
  • Rubber bumper with Borofloat® glass lens protects LEDs from damage
  • Rugged, modular construction allows for easy field serviceability
  • Lamp handle pin receptacle allows for easy attachment of various Spectroline® mounting accessories for in-line inspection applications (accessories sold separately)
  • Choice of standard 8 foot (2.4 m) or extra-long 20 foot (6.1 m) heavy-duty power cord with AC plug and rubber boot. Also available: Optional industrial power supply or in-line power supply with cord sets (sold separately). All power supplies available in 120V, 230V, 240V and 100V models.
  • Meet ASTM UV-A intensity and wavelength specifications for LPT and MPT; Certificate of Light Output for both output and wavelength measurements supplied with each lamp
  • UV-absorbing spectacles and soft carrying case included

QUADRAN™ 365 S-Series faceplate shown with (right) and without (left) integral black light filters.

QUADRAN™ 365 S-Series lamps can be quickly mounted for in-line inspections using various Spectroline® accessories!

Light Source: 4 UV-A LEDs, 1 White Light LED
Lamp Style: Pistol Grip
Lamp Head (WxH): 6 x 5.5 in (15 x 14 cm)
Length: 10 in (25 cm)
Weight: 3 lb (1.36 kg)
White Light LED Intensity:
High setting: 300 foot-candles (3,229 lux)
Low setting: 10 foot-candles (108 lux)

Power Requirement

AC lamp
120VAC* power cord supplied with lamp

* Also available in 120V, 230V, 240V and 100V versions

UV-A Beam Profile

EDGE™ 13 Series UV-A LED Panel Lamps


EDGE™ 13 Series UV-A LED Panel Lamps
The only overhead LED UV-A lamp to guarantee an IP65 rating, compliance and gang-ability.

Key Features

  • IP 65 rating: the lamp is protected from total dust ingress and low pressure jets of water from all angles
  • Meets ISO EN 3059 specifications for fluorescent inspection
  • Cool running, fanless design
  • Wide areas of coverage optimal fluorescent response
  • RRES 90061 Compliant Version Available (EDG-13SBLC)
  • ASTM E3022 Compliant Version Available (EDG-13SBLC and high intensity versions coming soon)
  • Long-lasting UV-A lenses protect against solarization
  • Integral black-light filters (EDG-13SBLC)
  • Gangable – expand area of coverage using single power source

2 Models to Choose From

EDG-13T

Penetrant Station UV-A LED Overhead Lamp

High Intensity (7,000 µW/cm2)

EDG-13SBLC

Rolls-Royce RRES 90061 compliant UV-A LED Overhead Lamp

Standard Intensity (<5,000 µW/cm2)

OLX-365 OPTI-LUX™ 365 Series

UV-A Inspection Flashlights

Affordable, Compact, UV-A LED Flashlights Designed Specifically for NDT

OPTI-LUX™ 365 Series inspection flashlights feature a powerful UV-A (365 nm) LED light source coupled with a rugged anodized lamp body. Lightweight and compact, they reduce user fatigue while providing an extremely uniform beam profile that surpasses those of more expensive lamps. Available in four models to suit your specific NDT needs: high-intensity or standard-intensity versions, each with or without an internal black light filter. All flashlights come with a Certificate of Light Output for both wavelength and output measurements.

Description

  • Choice of nominal steady-state UV-A intensity of 10,000 μW/cm2 or maximum of 4,500 μW/cm2 at 15 inches (38 cm)
  • Coverage area up to 2.5 inch (6.3 cm) diameter at 15 inches (38 cm), with minimum UV-A intensity of 1,200 μW/cm2
  • Anodized aluminum lamp body minimizes corrosion and stands up to years of heavy use
  • Instant-on operation; lamp reaches full intensity immediately
  • Convenient on/off switch for easy, one-handed operation
  • Powered by one rechargeable lithium-ion battery with an extra battery included with the lamp. Each provides 4 hours of continuous inspection between charges.
  • Meets ASTM UV-A intensity and wavelength specifications for FPI and MPI
  • Both high- and standard-intensity versions are available with internal black light filter. Externally mounted black light filter with rubber bumper can be purchased as an accessory.
  • All models come with a Certificate of Light Output for both output and wavelength measurements
  • Meets ISO 3059 Specifications

OPTI-LUX 365 Series flashlights come complete with lanyard, belt holster, two rechargeable batteries, two-position smart charging cradle with AC power cord, DC cord set, UV-absorbing spectacles and hard carrying case.

OPTI-LUX™ 365 flashlight with BF-365LX external black light filter accessory.

OPX-365 OPTIMAX™ 365

OPTIMAX™ 365 UV-A LED Inspection Flashlight
(Patent Pending)

Powerful, rechargeable, high-intensity UV-A inspection lamp featuring state-of-the-art, ultra-hi-flux LED technology!

Description

  • Nominal steady-state UV-A intensity of 18,000 μW/cm2 at 15 in (38 cm)
  • Low visible light emission– less than 2 foot-candles (22 lux)
  • Electronic Intensity Stabilizer assures consistent performance. Beam strength will not weaken between charges!
  • Rubber lamp protector prevents damage to LED head
  • Instant-on operation. Lamp reaches full intensity immediately!
  • Ergonomic, portable and rugged. Anodized aluminum lamp body minimizes corrosion and stands up to years of heavy use.
  • Powered by a rechargeable NiMH battery. Provides 90 minutes of continuous inspection between charges.
  • Meets ASTM UV-A intensity specifications for FPI and MPI
  • Also available: BF-365LX external light filter and DF-365 diffusing filter (optional accessories, each sold separately)

OPX-450 OPTIMAX™ 450

OPTIMAX™ 450 Rechargeable Blue Light LED Inspection Lamp

This versatile, cordless inspection lamp features a high-intensity, 450 nm blue light LED, a black anodized lamp body and our patented, thin-film dichroic lens to filter out long-wave visible light.

Description

  • Nominal steady-state blue light intensity of 7,000 μW/cm2 at 15 inches (38 cm)
  • Electronic Intensity Stabilizer assures consistent performance.
  • Beam strength will not weaken between charges!
  • Instant-on operation. Lamp reaches full intensity immediately!
  • Lightweight, cordless, ergonomic design eliminates fatigue
  • Portable and rugged. Anodized aluminum lamp body minimizes corrosion and stands up to years of heavy use
  • Powered by a rechargeable NiMH battery. Provides 90 minutes of
    continuous inspection between charges.
TRI-450B TRITAN™ 450


TRITAN™ 450
(U.S. Patent 5,905,268; other patents pending)

The Perfect NDT Lamp When UV-A Emissions Are a Concern!
Feature three cool-running, ultra-high flux 450 nm blue light LEDs with a broad-beam configuration. This powerful lamp provides a wider coverage area than conventional inspection lamps, while its compact head design allows access into areas inaccessible to larger inspection lamps. Ideal for most non-destructive testing applications.

Description

  • Nominal steady-state intensity of 9,500 μW/cm2 at 15 inches (38 cm)
  • Large 5 inch (13 cm) diameter coverage area at 15 inches (38 cm), with a minimum intensity of 2,000 μW/cm2
  • Rubber bumper with patented thin-film dichroic lens filters out long-wave visible light
  • Electronic Intensity Stabilizer ensures consistent LED performance
  • Built-in fans keep LEDs cool to maintain optimum light output during extended use
  • Instant-on operation. Lamp reaches full intensity immediately!
  • Rugged, ergonomic, angled lamp body provides safe, fatigue-free handling
  • Choice of standard 8 foot (2.4 m) or extra-long 20 foot (6.1 m) heavy-duty power cord with AC plug and rubber boot. Also available: Optional in-line power supply or industrial power supply with cord sets (sold seperately). All power supplies in 120V, 230V, 240V or 100V models.
  • Includes yellow contrasting spectacles and soft carrying case

Also available: TRITAN™ 450MB portable, battery-operated AC/DC lamp kit. Kit includes TRITAN 450M blue light LED lamp, rechargeable NiMH battery pack, power supply adapter with AC and DC cord sets, smart AC charger, yellow contrasting spectacles and soft, lightweight carrying case. AC charger available in 120V, 230V, 240V or 100V versions.

OPK-300N Multi-Lite® LED

Multi-Lite® LED

A New Powerful, Versatile, Multiple Wavelength, NDT Inspection Light!

The OPK-300N Multi-Lite® Kit features three Qwik-Connect™ interchangeable LED lamp heads that connect to a rugged, black-anodized flashlight body. It provides specific illumination in UV-A and blue light, and is ideal for both pre-screening of fluorescent particles in ambient light conditions and full- fledged NDT inspections utilizing magnetic particles or fluorescent penetrants. A convenient white light LED provides general illumination of dark work areas.

Description

  • Super-powerful LED optical output with ultra-highintensity 365 nm UV-A and 450 nm blue light performance
  • Provides nominal steady-state intensity of 18,000 µW/cm2 (UV LED) or 7,000 µW/cm2 (blue light LED) at 15 inches (38 cm)
  • Blue light LED with patented thin-film dichroic lens filters out long-wave visible light
  • Electronic Intensity Stabilizer ensures consistent performance. Beam strength will not weaken between charges!
  • Instant-on operation. Lamp reaches full intensity immediately!
  • Lightweight, cordless, ergonomic design eliminates fatigue
  • Meets ASTM UV-A intensity specifications for FPI and MPI
  • Powered by a rechargeable NiMH battery. Provides 90 minutes of continuous inspection between charges (smart AC and DC chargers included). AC charger available in 120V, 230V, 240V and 100V versions.

PM-1600B PowerMAX™ 450

LED Blue Light Flood Panel Lamp

PowerMAX™ 450 flood lamp features a panel of 16 powerful LEDs blue light (450 nm) specially engineered for non-destructive testing applications when limiting the use of UV-A light is a requirement. This versatile, stationary light source can be installed overhead or in-line, and can be ganged together to provide an even wider coverage area.

Description

  • 16 powerful blue light (450 nm) LEDs provide large coverage area
  • Easily mounted overhead for bench inspection
  • Built-in fans keep LEDs cool to maintain optimum light output during extended use
  • Gangable lamp units can be joined together to increase inspection area

Traditional Bulb UV-A Lamps

Spectroline offers an array of powerful HID inspection lights for NDT inspection.

VIVID™

BLE-LED-100, BLE-LED-150, BLE-LED-150/F
LED UV-A Replacement Bulbs – save on time and money by switching to LED! For use in HID lamp enclosures from Spectroline®.

UV-400 Series

SuperFlood™
Powerful UV-A
Stationary Flood Lamp

MAXIMA

ML-3500S, ML-3500FL, ML-3500MS
Super High-Intensity UV-A Micro Discharge Lamps.

Note to all customers who are searching for our traditional bulb lamp series (BIB-, SB-, FC- series).
Please be aware these are completely discontinued since technology has migrated to more reliable LED UV-A lights.
Spectroline® is the world leader in developing the MOST comprehensive handheld and overhead LED UV-A lamps for NDT, Forensics, and Specialty Applications, including ASTM E3022 and Rolls Royce Compliant versions, as well as UV-A LED replacement bulbs.
LED UV-A BULB ALTERNATIVE:
The VIVID™ UV-A LED replacement bulbs can be used in your traditional Spectroline® brand HID lamps, converting them to LED technology.
LED UV-A LAMP ALTERNATIVES
We offer a variety of Handheld, Overhead, Headlamp/Flashlight UV-A LED lamps which can be found here

Digital Radiometer/Photometers - AccuPRO™ Series

AccuPRO™ Series meters feature an advanced, microprocessor-controlled readout unit calibrated to accurately measure and display UV-A, Blue, and Visible light readings.

Available in two versions:
The AccuPRO™ (XP-2000) readout unit features a single dual-wavelength sensor detector designed to measure both ultraviolet and visible light.
The AccuPRO™ Plus (XP-4000) features a single 3-in-1 multi-purpose sensor that measures ultraviolet, visible and blue light.
These compact, lightweight, battery-operated units are ideal for use in the field, the factory or anywhere accurate light measurements are needed!

Description

  • The AccuPRO™ meter features a dual-wavelength UV/visible light sensor, while the AccuPRO™ Plus (shown) features a 3-in-1 sensor that measures UV, visible and blue light.
  • Large, easy to read, LCD screen with 4-digit auto-ranging display
    Both units provide accurate readouts for UV-A irradiance as well as visible illuminance
  • AccuPRO™ Plus unit also measures BLUE light!
  • Simply to use, three-button interface. Toggle between light measurement modes.
  • Overall accuracy greater than ± 5% per NIST standards
  • Superior band-pass interference filter provides excellent cosine response
  • One-touch PEAK with reset functions
  • User-defined power save and automatic shutoff
  • User-selectable, multilingual display settings at any operational level. Choose from English, French, German, Chinese and Spanish.
  • Rugged meter features protective rubber housing for better grip and to help prevent accidental breakage
  • Sealed sensor with water-resistant housing
  • Multi-wavelength sensor directly attached to meter by 3 ft (0.9 m) cord
  • Complies with ASTM specifications for MPI and FPI
  • Convenient on-board recharging
  • Powered by four rechargeable “AAA” nickel-metal hydride batteries (included)
  • Come complete with AC charger and padded carrying case
XRP-3000 AccuMAX™ - Advanced Digital Radiometer/Photometer Kit


Single detector with dual sensors measures both ultraviolet and visible light. Complies with ASTM specifications for MPI and FPI. Specially engineered for NDT applications.

  • Microprocessor-controlled readout unit with dual-wavelength sensor detector
  • Superior bandpass interference filter
  • Choice of direct or USB connection between sensor detector and readout unit
  • Excellent cosine response
  • User-selectable, multilingual display settings. Choose from English, French, German and Spanish.
  • Large, easy-to-read LCD screen
  • Sealed sensor housing and USB connection with water-resistant adapter

Description

  • Accurate
    The AccuMAX™ XRP-3000 radiometer/photometer kit uses a dualwavelength UV-A/VIS sensor detector to measure both ultraviolet and visible light. Featuring automatic zeroing, integration and signal hold, the unit provides accurate readouts for UV, visible irradiance or radiance. The LCD readout features ±0.2% linearity with the sensor sending the linearity correction data to the readout unit during initial power up. To ensure consistent results, sensors are designed with superior bandpass filters while optical stacks are assembled in Class 100 clean workstations. For precise spectral coverage, high-quality interference filters are used to resist degradation.
  • Durable
    The rugged meter housing features a removable, rubber protective boot for better grip and to help prevent accidental breakage. It also provides superior protection against moisture contamination, shock and humidity. In addition, the XRP-3000 features a liquid- and water-resistant, sealed sensor housing with a special self-sealing ring to help eliminate light leakage.
  • Simple Operation
    The XRP-3000 meter’s microprocessor is the heart of its simplicity. Just four pressure-sensitive buttons on the readout unit’s membrane keypad offer an extensive array of advanced functions. For example, to subtract ambient light, the user need only press the “ZERO” button. This activates autozeroing, sets the value to 0 and displays relative readings of subsequent measurements. “HOLD” freezes the display thus obtained, while “INTG” displays the average UV intensity after integrating the UV energy over time. These functions and other user-selectable parameters are easily accessible through the software’s main and sub menus.
  • Multilingual Display Settings
    The XRP-3000 features user-selectable, multilingual display settings.Choose from four languages: English, French, German and Spanish.
  • Reliable
    The XRP-3000 radiometer is carefully quality-controlled to ensure that each unit has up-to-date calibration and meets stringent measurement requirements. Housed in a durable polycarbonate case, it features dependable solid-state electro-optical circuitry for long, trouble-free operation.
  • Portable
    The XRP-3000 is compact, lightweight and battery-operated for convenient use in the factory, field or any other location where measurements need to be taken. A slide-out panel allows for easy replacement of the unit’s 9-volt batteries.


AccuMAX™ XS-555/L Luminance Sensor Detector

The perfect accessory for the AccuMAX Series meter. Ideal for technicians performing radiographic examinations. Meets ASTM E1742 standard.

Luminance is typically used to measure uniformly radiating surfaces, such as backlit panels, film viewers and monitors. The AccuMAX XS-555/L luminance sensor detector measures the brightness of a visible light source and, unlike many competitive units, allows the user the choice of displaying the results in three distinct units of measure: candelas per square meter (cd/m2), candelas per square foot (cd/ft2) and footlamberts (fL).

DM-365XA UV Radiometer

Provides increased accuracy for more repeatable results.

  • Measures UV-A light sources with overall accuracy of ± 5% per NIST standards
  • Auto-zeroing, excellent linearity and cosine response, solid-state design, compact, durable, simple operation, battery-level indicator
  • Sealed silicone photodiode protects against shock and humidity
  • Sensor housing is constructed with series of baffles and unique self-sealing mechanism to eliminate light leakage
  • Compact, lightweight and battery operated so measurements can be taken anywhere
  • Complies with ASTM specifications for MPI and FPI